Coulisseaux

Products > Multi-Slide > Numaflex - CNC Bending Machine

  • Features
  • Photos/videos
  • Services
  • Downloads

Numaflex - CNC Bending Machine

The best of both world combining speed and accuracy camless servo driven multi slide with the agility of a twin head bender.

Main Characteristics

  • Wire, Flat-Stock
  • Ø 2-10 mm / .08 - .4”
  • Tensile 600 N/mm2 – 85Ksi
  • From Coiled, cut-to-length material or both
  • Additional embedded twin head increase flexibility and reduce tooling costs
  • Multiple feed possible and in-line operation
  • High speed, High volume and tight tolerances
  • Available in 1,2 3 meter - 3,6,9 ft table
  • Hard tool change over 30-45 minutes
  • Camless, Servo-driven.

  Numaflex 2006 Numaflex 2008 Numaflex 2010 Numaflex 3006 Numaflex 3008 Numaflex 3010
Max. wire diameter (600N/mm2 - 85Ksi) 0.25 in / 6mm 0.31 in / 8 mm 0.40 in / 10 mm 0.25 in / 6 mm 0.31 in / 8 mm 0.40 in / 10 mm
Max. strip width 19.6 in / 50 mm 19.6 in / 50 mm 19.6 in / 50 mm 19.6 in / 50 mm 19.6 in / 50 mm 19.6 in / 50 mm
Table lenght 6.5ft / 2 m 6.5ft / 2 m 6.5ft / 2 m 9.9ft / 3 m 9.9ft / 3 m 9.9ft / 3 m
Feed precision ± 0.002 in / ± 0,05 mm ± 0.002 in / ± 0,05 mm ± 0.002 in / ± 0,05 mm ± 0.002 in / ± 0,05 mm ± 0.002 in / ± 0,05 mm ± 0.002 in / ± 0,05 mm
Number of servos 16 16 16 21 21 21
Bending head 2
2 2 2 2 2
Max. stroke 2.75 in / 70 mm 3.94 in / 100 mm 3.94 in / 100 mm 2.75 in / 70 mm 3.94 in / 100 mm 3.94 in / 100 mm
Bending force 20 kN 27 kN 45 kN 20 kN 27 kN 45 kN
Time for stroke = 0.8 in / 20 mm 0.08 s 0.11 s 0.15 s 0.08 s 0.11 s 0.15 s
Positioning speed Programable Programable Programable Programable Programable Programable
Acceleration / deceleration
Programable Programable Programable Programable Programable Programable
Positioning precision ± 0.0004 in / ± 0,01 mm ± 0.0004 in / ± 0,01 mm ± 0.0004 in / ± 0,01 mm 4,5 x 1,4 x 2,4 m
5,1 x 1,4 x 2,45 m
5,1 x 1,4 x 2,45 m
Traverse positioning Powering Motorised Motorised Motorised Motorised Motorised Motorised
Powering            
Torque limiter (with automatic reset) Yes Yes Yes Yes Yes Yes
Dimensions L x W x H 142 x 53 x 95 in
3,6 x 1,35 x 2,4 m
158 x 55 x 97 in
4 x 1,4 x 2,45 m
158 x 55 x 97 in
4 x 1,4 x 2,45 m
177 x 53 x 95 in
4,5 x 1,4 x 2,4 m
200 x 55 x 97 in
5,1 x 1,4 x 2,45 m
200 x 55 x 97 in
5,1 x 1,4 x 2,45 m
Net weight 6 tons 7 tons 7 tons 8 tons 12 tons 12 tons
Installed power 10 kVA 10 kVA 10 kVA 10 kVA 10 kVA 10 kVA
Production rate   A c c o r d i n g t o p a r t s h a p e f r o m 10 to 150 p c e s / m i n
Production changeover time A c c o r d i n g to t o o l i n g f r o m 1 5 t o 1 2 0 m i n u t e s (on the a v e r a g e 60 m i n u t e s)

Numaflex - CNC Bending Machine

Numaflex - CNC Bending Machine

With your performance in mind, NUMALLIANCE is constantly renewing its capabilities and developing new solutions to better serve you.

LOGISTICS, INSTALLATION & START UP
Our team of logistics & export specialists helps with on-time delivery of your equipment and a team of technicians helps with the initial start-up.

TRAINING
For you to take advantage of all the capabilities of our equipment, NUMALLIANCE offers training program at start-up and throughout the use of your machine.

SERVICE CONTRACT
Limit down time relying on NUMALLIANCE’s service contract offering turnkey service on your equipment-limitation may apply.

REMOTE ASSISTANCE
Our equipment is remotely connectable via the internet reducing the occurrence of service calls, thereby limiting the associated costs. This service allows you to download updates for the software updated for your equipment.

SPARE PARTS
We keep an inventory of all parts necessary to ensure minimal interruption of your production cycle.

FEASIBILITY & TOOLING DESIGN
Our Engineering departement evaluates the feasibility of each component of your equipment, assesses cycle time, designs the required tooling and writes the program.

Numaflex - CNC Bending Machine